Saleen Wing Instructions: Saleen wing brake light installation- Disconnect the battery to begin. Next locate the connector on the underside of the deck lid which connects to the third brake light and disconnect it. It should be a 4 wire connector with green and orange, black and white, solid green, and solid black wires. Cut the solid green and solid black wires a few inches back from the connector. From there you will need to connect the red wire from the kit to the green wire from the connector, and the black wire from the kit to the black wire from the connector. Reconnect the battery and test by applying the brake. If the new brake light fails to illuminate-go back and recheck the new connections for continuity.